INFLUENCE OF SPECIMEN ORIENTATION ON THE PLASTIC INSTABILITY AND NECKING OF EXTRUDED HDPE SHEET

Authors

  • Rida B. ARIEBY Department of Mechanical and Industrial Engineering, University of Tripoli, Libya Author
  • Osama A. Terfas Department of Marine and offshore Engineering, University of Tripoli, Libya Author
  • Rachid Rahouadj CNRS, LEMTA, UMR 7563, University of Lorraine, Nancy, France Author

DOI:

https://doi.org/10.66411/jer.v33i.44

Keywords:

High Density Polyethylene, Mechanical Behavior, Orientation Dependency, gPlastic Instability Criterion, Tensile Neckin

Abstract

In this work, the initiation and stabilization of the Plastic Instability of High-Density Polyethylene have been experimentally investigated and analyzed. Tensile tests using several complex loading paths involving large deformation have been carried out in order to determine the effect of different constant strain rates and various specimen orientations of extruded HDPE sheet on the elasto-viscoplastic behavior during necking. This work also examines the evolution of Poisson's ratio and Modulus of elasticity of semicrystalline polymers due to phenomenon of damage during instability stage. Based on the Considère criterion, a modified instability criterion is proposed taking into account the significant effect of volume variation due to damage under large deformation. The ability of the modified criterion to predict 1st and 2nd Considère strain of this polymer is examined. A good agreement between the modified criterion and the available experimental data is attained. 

251 138

References

[1] Peterlin, A. (1971). Molecular model of drawing polyethylene and polypropylene. Journal of Materials Science, 6(6), 490-508. DOI: https://doi.org/10.1007/BF00550305

[2] G'sell, C., & Dahoun, A. (1994). Evolution of microstructure in semi-crystalline polymers under large plastic deformation. Materials Science and Engineering: A, 175(1-2), 183-199. DOI: https://doi.org/10.1016/0921-5093(94)91058-8

[3] Jabbari-Farouji, S., Rottler, J., Lame, O., Makke, A., Perez, M., & Barrat, J. L. (2015). Plastic deformation mechanisms of semicrystalline and amorphous polymers. ACS Macro Letters, 4(2), 147-150. DOI: https://doi.org/10.1021/mz500754b

[4] Guo, H., Rinaldi, R. G., Tayakout, S., Broudin, M., & Lame, O. (2021). Characterization of the spherulitic deformation in equatorial region and cavitation in HDPE materials submitted to mixed-mode oligo-cyclic tensile loading. Polymer Testing, 99, 1-12. DOI: https://doi.org/10.1016/j.polymertesting.2021.107208

[5] Andrews, J. M., & Ward, I. M. (1970). The cold-drawing of high density polyethylene. Journal of Materials Science, 5(5), 411-417. DOI: https://doi.org/10.1007/BF00550003

[6] Séguéla, R. (2007). On the natural draw ratio of semi‐crystalline polymers: review of the mechanical, physical and molecular aspects. Macromolecular Materials and Engineering, 292(3), 235-244. DOI: https://doi.org/10.1002/mame.200600389

[7] Crist, B., & Metaxas, C. (2004). Neck propagation in polyethylene. Journal of Polymer Science Part B: Polymer Physics, 42(11), 2081-2091. DOI: https://doi.org/10.1002/polb.20087

[8] G'sell, C., Hiver, J. M., & Dahoun, A. (2002). Experimental characterization of deformation damage in solid polymers under tension, and its interrelation with necking. International Journal of Solids and Structures, 39(13-14), 3857-3872. DOI: https://doi.org/10.1016/S0020-7683(02)00184-1

[9] Ye, J., André, S., & Farge, L. (2015). Kinematic study of necking in a semi-crystalline polymer through 3D Digital Image Correlation. International Journal of Solids and Structures, 59, 58-72. DOI: https://doi.org/10.1016/j.ijsolstr.2015.01.009

[10] Kuriyagawa, M., & Nitta, K. H. (2011). Structural explanation on natural draw ratio of metallocene-catalyzed high density polyethylene. Polymer, 52(15), 3469-3477. DOI: https://doi.org/10.1016/j.polymer.2011.05.028

[11] G'sell, C., Aly-Helal, N. A., & Jonas, J. J. (1983). Effect of stress triaxiality on neck propagation during the tensile stretching of solid polymers. Journal of Materials Science, 18(6), 1731-1742. DOI: https://doi.org/10.1007/BF00542069

[12] Mesbah, A., Elmeguenni, M., Yan, Z., Zaïri, F., Ding, N., & Gloaguen, J. M. (2021). How stress triaxiality affects cavitation damage in high-density polyethylene: Experiments and constitutive modeling. Polymer Testing, 100, 107248-107258. DOI: https://doi.org/10.1016/j.polymertesting.2021.107248

[13] Saadallah, Y., Derfouf, S., & Guerira, B. (2019). A viscoelastic-viscoplastic model for a thermoplastic and sensitivity of its rheological parameters to the strain-rate. Frattura ed Integrità Strutturale, 13(49), 666-675. DOI: https://doi.org/10.3221/IGF-ESIS.49.60

[14] Amjadi, M., & Fatemi, A. (2020). Tensile behavior of high-density polyethylene including the effects of processing technique, thickness, temperature, and strain rate. Polymers, 12(9), 1857-1871. DOI: https://doi.org/10.3390/polym12091857

[15] Ferhoum, R., Aberkane, M., & Hachour, K. (2014). Analysis of thermal ageing effect (hold time-crystallinity rate-mechanical property) on high density polyethylene (HDPE). International Journal of Materials Science and Applications, 2(3), 109-114. DOI: https://doi.org/10.11648/j.ijmsa.20130203.17

[16] Ponçot, M., Addiego, F., & Dahoun, A. (2013). True intrinsic mechanical behaviour of semi-crystalline and amorphous polymers: influences of volume deformation and cavities shape. International Journal of Plasticity, 40, 126-139. DOI: https://doi.org/10.1016/j.ijplas.2012.07.007

[17] Ayoub, G., Zaïri, F., Nait-Abdelaziz, M., & Gloaguen, J. M. (2010). Modelling large deformation behaviour under loading–unloading of semicrystalline polymers: application to a high density polyethylene. International Journal of Plasticity, 26(3), 329-347. DOI: https://doi.org/10.1016/j.ijplas.2009.07.005

[18] Zhang Yi, & Jar P.-Y. (2016). Effects of compressive loading history on mechanical properties of HDPE. 24th International Congress of Theoretical and Applied Mechanics (ICTAM2016), 21-26 August 2016, Montreal, Canada.

[19] Nitta, K. H., & Yamana, M. (2012). Poisson’s ratio and mechanical nonlinearity under tensile deformation in crystalline polymers, Rheology. Rheology. In Tech, Rijeka, Croatia, 113-132. DOI: https://doi.org/10.5772/34881

[20] Arieby, R. B., Terfas, O. A., & Rahouadj, R. (2020). Efects of loading history on the mechanical behavior of semi-crystalline polymer." Journal of Engineering Research, 29, 69-86. DOI: https://doi.org/10.66411/jer.v29i.91

[21] Xu, M. M., Huang, G. Y., Feng, S. S., McShane, G. J., & Stronge, W. J. (2016). Static and dynamic properties of semi-crystalline polyethylene. Polymers, 8(4), 77-91. DOI: https://doi.org/10.3390/polym8040077

[22] Zhou, H., & Wilkes, G. L. (1998). Orientation-dependent mechanical properties and deformation morphologies for uniaxially melt-extruded high-density polyethylene films having an initial stacked lamellar texture. Journal of Materials Science, 33(2), 287-303. DOI: https://doi.org/10.1023/A:1004351209140

[23] Varghese, J., & Murugan, R. (2018). Influence of orientation of extrusion direction and strain rate on the mechanical behaviour of extruded thermoplastic sheets. Materials Today: Proceedings, 5(11), 24043-24049. DOI: https://doi.org/10.1016/j.matpr.2018.10.197

[24] Arieby, R. B. (2013). Modeling and Investigation of Volume Strain at Large Deformation under Uniaxial Cyclic Loading in Semi Crystalline Polymer. International Journal of Mechanical and Mechatronics Engineering, 7(6), 1167-1172.

[25] Song, Y., & Zheng, Q. (2007). Influence of annealing on conduction of high‐density polyethylene/carbon black composite. Journal of Applied Polymer Science, 105(2), 710-717. DOI: https://doi.org/10.1002/app.26076

[26] Addiego, F. (2006). Caractérisation de la variation volumique du polyéthylène au cours de la déformation plastique en traction et en fluage (Doctoral dissertation, Institut National Polytechnique de Lorraine).

[27] Arieby, R. B., Mrabet, K., Terfas, O. A., Laurent, C., & Rahouadj, R. (2017). Anisotropic mechanical behavior of semi‐crystalline polymers: Characterization and modeling of non‐monotonic loading including damage. Journal of Applied Polymer Science, 134(7), 44468-44479. DOI: https://doi.org/10.1002/app.44468

[28] Farge, L., André, S., Meneau, F., Dillet, J., & Cunat, C. (2013). A common multiscale feature of the deformation mechanisms of a semicrystalline polymer. Macromolecules, 46(24), 9659-9668. DOI: https://doi.org/10.1021/ma4019747

[29] Pawlak, A., Galeski, A., & Rozanski, A. (2014). Cavitation during deformation of semicrystalline polymers. Progress in Polymer Science, 39(5), 921-958. DOI: https://doi.org/10.1016/j.progpolymsci.2013.10.007

[30] Vincent, P. I. (1960). The necking and cold-drawing of rigid plastics. Polymer, 1, 7-19. DOI: https://doi.org/10.1016/0032-3861(60)90003-3

[31] Gaucher‐Miri, V., François, P., & Séguéla, R. (1996). On the mechanisms of initiation and propagation of plastic instability in polyethylene under tensile drawing. Journal of Polymer Science Part B: Polymer Physics, 34(6), 1113-1125. DOI: https://doi.org/10.1002/(SICI)1099-0488(19960430)34:6<1113::AID-POLB9>3.0.CO;2-Y

[32] Balieu, R., Lauro, F., Bennani, B., Haugou, G., Chaari, F., Matsumoto, T., & Mottola, E. (2015). Damage at high strain rates in semi-crystalline polymers. International Journal of Impact Engineering, 76, 1-8. DOI: https://doi.org/10.1016/j.ijimpeng.2014.08.013

[33] Nguyen, N. T., Seo, O. S., Lee, C. A., Lee, M. G., Kim, J. H., & Kim, H. Y. (2014). Mechanical behavior of AZ31B Mg alloy sheets under monotonic and cyclic loadings at room and moderately elevated temperatures. Materials, 7(2), 1271-1295. DOI: https://doi.org/10.3390/ma7021271

[34] Ward, I. M., & Sweeney, J. (2012). Mechanical Properties of Solid Polymers. John Wiley. Chichester, UK. DOI: https://doi.org/10.1002/9781119967125

[35] Berthelot, J.-M. (1999). Composite Materials. Springer, New York, NY, United States. DOI: https://doi.org/10.1007/978-1-4612-0527-2

[36] Benham, P. P., & MCCAMMON. D. (1971). Studies of creep and contraction ratio in thermoplastics. Plastics & Polymers, 39(140), 130 -136.

[37] Naqui, S. I., & Robinson, I. M. (1993). Tensile dilatometric studies of deformation in polymeric materials and their composites. Journal of Materials Science, 28(6), 1421-1429. DOI: https://doi.org/10.1007/BF00363333

[38] Gaucher–Miri, V., Depecker, C., & Séguéla, R. (1997). Reversible strain‐induced order in the amorphous phase of a low‐density ethylene/butene copolymer. Journal of Polymer Science Part B: Polymer Physics, 35(13), 2151-2159. DOI: https://doi.org/10.1002/(SICI)1099-0488(19970930)35:13<2151::AID-POLB15>3.0.CO;2-3

[39] Cangemi, L., Elkoun, S., G'Sell, C., & Meimon, Y. (2004). Volume strain changes of plasticized poly (vinylidene fluoride) during tensile and creep tests. Journal of Applied Polymer Science, 91(3), 1784-1791. DOI: https://doi.org/10.1002/app.13313

[40] Castagnet, S., & Deburck, Y. (2007). Relative influence of microstructure and macroscopic triaxiality on cavitation damage in a semi-crystalline polymer. Materials Science and Engineering: A, 448(1-2), 56-66. DOI: https://doi.org/10.1016/j.msea.2006.11.100

[41] Haward, R. N. (2007). Strain hardening of high density polyethylene. Journal of Polymer Science Part B: Polymer Physics, 45(9), 1090-1099. DOI: https://doi.org/10.1002/polb.21123

[42] Ye, J., André, S., & Farge, L. (2015). Revisiting the Natural Draw Ratio concept through DIC data. 16th International Conference on Deformation, Yield and Fracture of Polymers, March 2015, Netherland.

[43] Hart, E. W. (1967). Theory of the tensile test. Acta Metallurgica, 15(2), 351-355. DOI: https://doi.org/10.1016/0001-6160(67)90211-8

[44] G'sell, C. (1988). Instabilités de déformation pendant l'étirage des polymères solides. Revue de Physique Appliquée, 23(6), 1085-1101. DOI: https://doi.org/10.1051/rphysap:019880023060108500

[45] Nazarenko, S., Bensason, S., Hiltner, A., & Baer, E. (1994). The effect of temperature and pressure on necking of polycarbonate. Polymer, 35(18), 3883-3892. DOI: https://doi.org/10.1016/0032-3861(94)90271-2

[46] Al Omar, A., & Prado, J. M. (2012). Criteria for prediction of plastic instabilities for hot working processes (part I: theoretical review). Welding International, 26(12), 921-934. DOI: https://doi.org/10.1080/09507116.2011.592704

[47] Hussein, M. (2018). Effects of strain rate and temperature on the mechanical behavior of carbon black reinforced elastomers based on butyl rubber and high molecular weight polyethylene. Results in Physics, 9, 511-517. DOI: https://doi.org/10.1016/j.rinp.2018.02.043

Downloads

Published

31-03-2022

Issue

Section

Articles

How to Cite

[1]
R. ARIEBY, O. Terfas, and R. Rahouadj, “INFLUENCE OF SPECIMEN ORIENTATION ON THE PLASTIC INSTABILITY AND NECKING OF EXTRUDED HDPE SHEET ”, JER, vol. 33, pp. 19–36, Mar. 2022, doi: 10.66411/jer.v33i.44.

Most read articles by the same author(s)